Shacman Large Torque CNG Tractor 380HP
Shacman Large Torque CNG Tractor 380HP
1. Adopt CNG as fuel, economic and environmental.
2. Light weight and low gas consumption, decrease utilize fee for you.
3. Vehicle testing and component testing， to ensure the reliability and quality.
4. Fuel safety, cylinder safety, gas supply system safety and cab safety. safety is our principle.
Brief introduction
The SHACMAN tractor use CNG as fuel, which makes the tractor enviromental friendly and ecnomic, The tractor will save
a big cost in your daily use.
Our tractor was tested very strict before handing over, from chassis test, CNG cylinder test to fuel supply system test, this
could keep the safety of the tractor.
Datasheet
| CNG tractor 380HP | |||||
| Engine | Type | WEICHAI WP12NG380E40, in line ,water cool,Turbo intercooler, spark ignition type, | Fuel tank | Type | CNG-145Lx8ea |
| Max power | 380PS(280kw)/2200rpm | Wheel&Tires | Specification | 12.00R20,8.5-20 | |
| Max torque | 1500nm/1400-1600rpm | Steering | Type | integral circuiting ball power steering | |
| Displacement | 11.596 L | Steering column | Tilt&telescopic | ||
| Brake | Service | compressed air brake. Dual circuit | Steering wheel | 4-spoke wheel with horn button | |
| Lining front | Φ430 | Clutch | Type | Hydraulic control with air assisted | |
| rear | Φ420 | Plate diameter | Single plate diaphragm spring Out side diameter:430mm | ||
| Material | Non-asbestos | Suspension | Front suspension type: | semi-elliptical leaf spring Size(LxW): 1800×90 | |
| Parking | Power spring brake acting on rear wheel | Rear suspension type: | semi elliptical leaf spring Size(LxW): 1700×90 | ||
| Auxiliary | Exhaust brake | Weights and dimension | Curb weight（kg) | 10690 | |
| Axles | Front | MAN 7500kg | Axle load(kg) | Front 7500, Rear 13000×2 | |
| Rear | STEYR 13000kg Double reduction drive axle | Permissible payload(kg) | 20000 | ||
| Calculated performance | Max. speed(km/h) | 128 | dimension(mm） | 7400x2490x3720 | |
| Max.gradeability(%) | 30 | Wheelbase | 3800+1350 | ||
| Min.turning radius(m) | 8.5 | Frame | Type | Ladder type, double tier | |
| Coupler(option) | Make and type | 2inch,isn't JOST | Size(HxWxt) | 243×80×8 | |
| Loading capacity | 20 ton | Width at frame rear(mm) | 780 | ||
For more details, pls feel free to contact us.
Factory Show
Product Tag:
